United Technologies TruVision SVR Betriebsanweisung PDF herunterladen (Seite 34)

Cameras

34 TruVision SVR System User Guide

White Balance

Allows the user to adjust the camera’s image white balance.

Adding Cameras to SVR

There are two ways to add IP Cameras to a TruVision SVR server:

• Adding manually

• Adding from the list of discovered devices

Add Cameras to an SVR Recorder with the Discovery Tool

Adding IP cameras from the device discovery list is a convenient way to assign single or multiple

cameras to an SVR recorder.

1. Right-click on the SVR in TruVision Navigator device tree

2. Select [Add IP Cameras], and click [Add via Device Discovery]. The Device discovery window

will appear.

3. Select the IP camera(s) to be added to the TruVision SVR and click [Add].

Note: Only cameras supported by that recorder will be discovered. Also, cameras assigned to

a recorder will not be shown in this list.

Note: The Discovery Tool will attempt to add devices by using their default credentials. If the

credentials of a device were previously changed from default values, the device is still

going to be added to the device tree and SVR, but will be shown as offline. In this case,

updated credentials need to be applied manually by the user from the device properties

or configuration menu with a right-click on the device.

Add Cameras to an SVR Recorder Manually

Adding IP cameras with the “Add Manually” option gives user the ability to assign cameras to SVRs

in a traditional way.

Note: Cameras with a “+” sign refer to the alternate stream of the camera. For low bandwidth

environments, these cameras may be added to the SVR instead of adding the primary

stream.

1. Right-click on the SVR in TruVision Navigator device tree

2. Select [Add IP Cameras], and Click [Add Manually]. A new window will appear.

3. Fill the fields with the related IP camera information

4. Click [OK].

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Keine Kommentare

United Technologies TruVision SVR Betriebsanweisung Seite 34